返回
产品&解决方案
CPE-063, 螺纹式插装导开阀
2012-05-15 10:41  浏览:739
价格:未填
型号:CPE-063
发货:3天内
发送询价
详细信息
CPE-063, 螺纹式插装导开阀,价格
  特性/Characteristic:
●液控单向阀是非调节的开关阀仅使用负荷锁固,因此不提供流畅的运动控制。
●允许经一单向阀自由流通由2口到1口,反流封闭直到一正比于负荷压力在3口打开才由1口流到2口。
●Pilot to open check valves are non modulating on/off valves used for load locking only and do not provide smooth motion control.
●They allow free flow from port 2 to 1 then block reverse flow until a pilot pressure directly proportional to the load pressure is sensed at port 3 enabling a pilot a pilot piston to push the poppet off its seat.
  性能表/Specification:
型号
Model
阀系说明
Description
额定流量
Rated Flow
最高压力
Max.pressure
重量
Weight
CPE-063 提动式
Poppet type 
4:5:1导压比
4:5:1pilot ratio
请参阅压损曲线表 315bar(最大值) 0.63:V:0.12Kg
        X:0.12Kg
0.93:V:0.22Kg
         X:0.22Kg
  选购指南/How to order:
CPE 063 X 0.2 N
系列编号:
导开阀
Series No.
pilot to open 
Check Valves 
阀孔型号
Cavity Size
调整方式 Controls
X-标准型
Standard Type 
V-附外部导压口
With externel pilot port 
单向阀开阀压
Cracking pressure 
0.2-0.2 bar 
2.0-2.5 bar 
 
油封材质
Seals:N-丁腈橡胶
Buna N.
V-氟橡胶 Viton.
  尺寸图/Dimensions(mm)
分享到: