客服热线：
手机版
二维码
点击图片查看原图
| 缸径（mm） | 32 | 40 | 50 | 63 | 80 | 100 |
| 工作介质 | 经过滤的压缩空气 | |||||
| 动作型式 | 双动 | |||||
| 耐压试验压力 | 1.5Mpa（15kgf/cm2) | |||||
| 最高使用压力 | 1.0Mpa(10kgf/cm2) | |||||
| 最低工作压力 | 0.1Mpa（1kgf/cm2) | |||||
| 缓冲 | 气缓冲 | |||||
| 环境温度 | (-10℃～60℃) | |||||
| 使用速度 | 50～500mm/s | |||||
| 行程误差(mm) | 0～250:0～+1.0,251～1000:0～+1.5 | |||||
| 1001～1500:0～2.0 | ||||||
| 使用寿命 | 不低于3000KM | |||||
| 润滑 | 不需要 | |||||
| 接管口径 | (1/8) | (1/4) | (3/8) | (1/2) | ||
| 缸径 | 标准行程 | 缓冲行程 | 磁性开关 | 固定码 |
| (mm) | （mm) | (mm) | ||
| 32 | 25，50，75 100,125,150,175 200,250,300,400,500 |
18.8 | D-A54 | DXT30 |
| 40 | 18.8 | 工作电压 | ||
| 50 | 21.3 | DC24V | ||
| 63 | 21.3 | AC110V/220V | ||
| 80 | 30.3 | 工作电流 | DXT35 | |
| 100 | 29.3 | 5-50/25/12.5mA |
使用注意事项：
1、使用的电压及电流避免超负荷。
2、严禁磁性开关直接与电源接通，必须同负载串联使用。
3、严禁有其它强磁体靠近磁性开关，如有应屏蔽。SCGB32-25,SCGB32-50,SCGB32-75,SCGB32-100,SCGB32-125,SCGB32-150,SCGB32-175,SCGB32-200,
SCGB32-250,SCGB32-300,SCGB32-400,Sanwo SCGB32-500,SCGB40-250,SCGB40-300,SCGB40-400,
SCGB40-25,SCGB40-50,SCGB40-75,SCGB40-100,SCGB40-125,SCGB40-150,SCGB40-175,SCGB40-200,
SCGB50-25,SCGB50-50,SCGB50-75,SCGB50-100,SCGB50-125,SCGB50-150,SCGB50-175,SCGB50-200,
SCGB50-250,SCGB50-300,SCGB50-400,CCLair SCGB50-500,SCGB63-250,SCGB63-300,SCGB63-400,SCGB63-500,
SCGB63-25,SCGB63-50,SCGB63-75,SCGB63-100,SCGB63-125,SCGB63-175,SCGB63-200,SCGB100-500,
SCGB80-25,SCGB80-50,SCGB80-75,SCGB80-100,SCGB80-125,SCGB80-150,SCGB80-175,SCGB80-200,
SCGB80-250,CCLair SCGB80-300,SCGB80-400,SCGB80-500,SCGB100-250,SCGB100-300,SCGB100-400,
SCGB100-25,SCGB100-50,SCGB100-75,SCGB100-100,SCGB100-125,Sanwo SCGB100-150,SCGB100-175,
